Lifetime of Unrivalled Australian Technical Support

Balmar Duo Charge DDC-12/24 Regulator

Category: Tags: ,

Features

Digital Duo Charge: DDC-12/24
Multi Bank Charging

  • The DDC is a Solid-State Battery Combiner
  • Control Voltage and Current between House and Start Batteries
  • Eliminates the Need for an Isolator, Relay or Manually Operated Battery Switch
  • Used in Concert with Max Charge or ARS-5 Regulators
  • Can also be Employed without a Balmar Regulator
  • Works in Both 12V and 24V Applications
  • House and Start Batteries can be different technologies
  • Start Battery Temperature Sensing Available with the MC-TS-B Sensor Cable
  • 4 Battery Programs Supported for the Start Battery:
                Standard Flooded, Deep Cycle Flooded, AGM and Gel Cell

The Digital Duo Charge (DDC-12/24) provides a “hands off” solution for charging two battery banks without the use of problematic isolators or manual battery switches. During charging the DDC-12/24 monitors voltage at the house battery. When voltage exceeds the set minimum (typically 13.2V in a 12V system and 26.4V in a 24V system) the DDC-12/24 automatically engages, providing up to 30A charge current to the starting battery.

When no charge source is present, the DDC-12/24 separates the batteries so the starting battery won’t be accidentally discharged into the house battery. An optional solenoid control enables higher start battery charging output when required.

Specifications

B-DDC-12/24Digital Duo Charge, 12/24v, w/Wires

Alternator Regulators: Temperature Sensors

B-MC-TS-ABalmar Alternator Temperature Sensor – 135cm long
B-MC-TS-BBalmar Battery Temperature Sensor – 6m long

Upgrade the experience